Filter By:
Hubs
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$26.79
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Front
- Drilling: 36H
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
$49.39
- Includes 9T Micro drive cog
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Drilling: 36H
- Axle: Nutted 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Loose
$50.49
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
- Hole Count: 48
$51.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
$52.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
- Hole Count: 36
$52.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear
- Gears: Flip-flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
$52.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Front
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
$52.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Rear
- Gears: Flip/flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
$64.79
- Single speed BMX hubs with a 14mm axle slotted to 3/8-inch
- Sealed bearings
- Use: Rear
- Gears: Singlespeed Freewheel
- Drilling: 36H
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
$93.39
- Heat-treated axle for improved strength
- Angled flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Axle: 14mm, 3/8-inch
- Material: Alloy
- Drilling: 36
$93.39
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-Pawl Cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Spacing / Axle: 14mm
- Material: Alloy
- Drilling: 48
$116.59
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 32
$116.59
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 36
$168.39
- Singlespeed freecoaster hubs with 9-tooth driver
- Sealed bearings
- Use: Rear
- Gears: Singlespeed w/ 9-tooth driver
- Drilling: 36
- Axle: 14mm
- OLD: 110mm
- Bearing Type: Sealed
$79.99
Bontrager Affinity Comp 12-Speed XDR Driver Body
- Replacement freehub bodies for Bontrager Comp level hubs
- Compatible with Race, Affinity Comp, and Rhythm Comp
$79.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 110mm forks
- Flange diameter: 58mm
- NDS flange offset: 25.5mm
- DS flange offset: 37.75mm
- 28 hole, 6-bolt rotor
$105.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 150mm forks
- Flange diameter: 58mm
- NDS flange offset: 45mm
- DS flange offset: 53.5mm
- 32 hole, 6-bolt rotor
$209.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset.
Product details
- Bontrager rear hub for use with 197mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 59.5mm
- DS flange offset: 46mm
- 32 hole, 6-bolt rotor
$167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings
- Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
$171.99 - $265.00
$265.00
Up to 35% Off
Our Boost Centerlock front hubs use one-piece axles to provide a stiff hub with rail accurate steering. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
Engineered, manufactured, and assembled in Portland, Oregon USA
King Lifetime Warranty
Wide flange placement
Fits 110x15mm Boost
Legendary made-in-house bearings
Easily serviceable with a T10 Torx and pick or pen knife
Completely re-buildable with our ISO Hub Service Tool
Ceramic bearing upgrade available
Available in 28, hole spoke count
HUB SPECIFICATIONS
Axle Width: 110mm
Flange Diameter DS & NDS: 57.4mm
Center to Flange DS: 35.5mm
Center to Flange NDS: 27.5mm
28h
$241.60
$302.00
20% Off
Milled from solid bar stock and fitted with King's made-in house bearings. These high flange hubs optimize durability, weight and performance.
- Compatible with 6-bolt rotors
- Please note that radial lacing voids the manufacturer's warranty
- 5-Year warranty
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Color: Black
- Spoke Interface: J-Bend
- Front Axle: 20mm Thru x 110mm
$292.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- 5-year built-to-last warranty
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
$363.75
$485.00
25% Off
Our Boost Centerlock 148x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
All Chris King rear hubs come with that signature, angry-bee sound.
Engineered, manufactured, and assembled in Portland, Oregon USA
King Lifetime Warranty
Canted flanges for stronger wheel builds
Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
Legendary made-in-house bearings
28h
Available with Micro Spline, HG or XD driveshell
Easily serviceable with a T10 Torx and pick or pen knife
Ceramic bearing upgrade available
Specifically designed for "BOOST" 148mm x 12mm axle standard
HUB SPECIFICATIONS
Axle Width: 148mm
Flange Diameter DS & NDS: 57.4mm
Center to Flange DS: 24mm
Center to Flange NDS: 36.3mm
28h
$485.00
WHY WE MAKE THIS
Chris, our founder, and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub because it's spiritually imperative that we do so, to honor the dirt that has given us so much, and to keep Chris happy.
WHY YOU WANT IT
Our Boost Centerlock 148x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snap rings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
All Chris King rear hubs come with that signature, angry-bee sound.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- 24h, 28h, and 32h
- Available with Micro Spline, HG or XD driveshell
- Easily serviceable with a T10 Torx and pick or pen knife
- Ceramic bearing upgrade available
- Specifically designed for "BOOST" 148mm x 12mm axle standard
HUB SPECIFICATIONS:
- Axle Width: 148mm
- Flange Diameter DS & NDS: 57.4mm
- Center to Flange DS: 24mm
- Center to Flange NDS: 36.3mm
$534.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- 5-year built-to-last warranty
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
$534.00
WHY WE MAKE THIS
It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market.
WHY YOU WANT IT
R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there.
On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive™ system.
Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
All Chris King rear hubs come with that signature, angry-bee sound.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- Legendary made-in-house bearings · King Lifetime Warranty
- Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag-free engagement
- Available with Shiamano/Sram HG or Sram XDR drive shell
- 142mm x 12mm thru axle rear
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
- Ceramic bearing upgrade available
- Available in 24h, 28h, and 32h
- Lockring is sold separately (PHB355) and is required for rotor installation on rear hub
HUB SPECIFICATIONS:
- Axle Width: 142mm
- Flange Diameter DS & NDS: 57.4mm
- Center to Flange DS: 18.7mm
- Center to Flange NDS: 33mm
$61.30 - $99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$61.52
$76.90
20% Off
The new standard for durability and price.
- Contact-free seals and high precision build guarantee smooth bearings
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
$223.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion
$223.90
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$259.90
Reliable, simple, and e-bike specific hub.
To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.
$383.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm
$460.00
- Made start to finish in Asheville, NC
- Light weight and easy to service
- 690 POE feehub for near instantaneous 0.52 degree engagement
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
Page 1 of 3
Next page